1、金屬屋面搭接處:
1, metal roof lap:
金屬屋面搭接處先涂一層抗紫外線純丙烯酸涂料，在其仍為濕潤時，把15～20厘米寬的防水聚酯布嵌入其間，再?gòu)纳厦嬗妹郎�純丙烯酸屋頂防水涂料充沛�?rùn)澤防水聚酯布，以致全干。
Metal roof joint first coated with a layer of anti ultraviolet acrylic paint, it is still in the wet, 15 to 20 cm wide sewing polyester cloth embedded therein, and from above with acrylic waterproof paint and plenty of moisture sewed polyester cloth, so that the whole stem.

2、金屬屋面的異物（如煙囪、出氣孔、風機口等）:裁剪尺度、外形適宜的防水聚酯布，并按技能請求裁剪好網站價格，在卓異物四周涂一丙烯酸屋頂防水涂料，把裁剪好的防水聚酯布鋪于其上（成都人事考試信息網），再?gòu)纳厦嬗妹郎�丙烯酸屋頂防水涂料充沛�?rùn)澤防水聚酯布，保證不起泡、不起皺。

2, outstanding metal roof (such as chimneys, vents, fan mouth etc.): cut the size and shape suitable for sewing polyester cloth, and according to the request in good cutting skills, outstanding surroundings with acrylic waterproof paint, cut good sewing polyester cloth on it, and then from the using acrylic waterproof paint and plenty of moisture sewed polyester cloth, ensure no foaming, wrinkle.

3、金屬屋面固件：用10㎝×10㎝的防水聚酯布，按上述相同的辦法處理。
3, metal roof firmware: with 10 cm * 10 cm of the sewing polyester cloth, processing according to the same method.

4、金屬屋面天溝：天溝搭接縫, 落水口等處先用金屬屋面屋頂防水系統進行部分屋頂防水處理，然后在更大屋頂防水規模涂一層丙烯酸屋頂防水涂料, 在其仍為濕潤時鋪上縫織聚酯布, 再?gòu)纳厦嬗帽�烯酸屋頂防水涂料充沛�?rùn)澤縫織聚酯布, 以致全干. 最少12小時后, 最終再涂一層丙烯酸屋頂防水涂料.
4, the metal roof gutter: gutter joint, water hole at the first part of waterproof treatment for metal roof waterproofing system, and in the larger scale waterproof coating a layer of acrylic waterproof coating, it is still in the wet covered sewing polyester cloth, and then from the above acrylic waterproof paint and plenty of moisture polyester sewing dry cloth, so that at least 12 hours after the final, then coated with a layer of acrylic waterproof paint.